Size Card Type Thickness Loading Capacity Loading Direction
ISO781A ID-1 Type
54.0×85.6 mm
(2.1×3.3 in.)
With embossing 1.24 mm (0.05 in.) or
less
1 card Horizontal (Landscape)
Without embossing 0.76 mm (0.03 in.) or
less
5 cards
Specications of Laminated Cards
e specication of laminated cards you can load into the scanner.
Size Thickness Loading Capacity
120.0×150.0 mm (4.7×5.9 in.) or less 0.8 mm (0.03 in.) or less 1 card
Specications for Originals Using the Carrier Sheet
e optional Carrier Sheet is a sheet designed to transport originals through the scanner. You can scan originals
that are larger than A4/Letter size, important documents or photos which must not damaged, thin paper, irregular
shaped originals, and so on.
e
following table provides the conditions for using the Carrier Sheet.
Type Size Thickness Loading Capacity of
the Carrier Sheet
Originals that cannot be
loaded directly into the
scanner
A3
*1
A4
B4
*1
Letter
Legal
*1
B5
A5
B6
A6
A8
Custom size:
❏ Width: up to 431.8 mm (17 in.)
*2
❏ Length: up to 297 mm (11.7 in.)
*3
0.3 mm (0.012 in.) or less
(excluding the thickness of
the Carrier Sheet)
5 sheets
*1 Fold in half to set.
*2 Originals that are wider than 215.9 mm (8.5 in.) need to be folded in half.
*3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the
scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in Epson Scan 2.
User's Guide
Specications of Originals and Placing Originals
21
To Next Page
Loading...
Need help?
General
