Epson ds-570w User Manual

4. Slide the edge guides to t the edge of the laminated cards.
Note:
❏ To scan laminated cards, select Scan laminated card on the Settings window on the Main Settings tab in Epson
Scan 2 to increase the accuracy of auto size detection. See the Epson Scan 2 help for details.
❏ To scan laminated cards, select O in Detect Double Feed on the Main Settings tab in Epson Scan 2. See the Epson
Scan 2 help for details.
If you forget to disable Detect Double Feed in Epson Scan 2 and a double feed error occurs, remove the card from
the ADF and then reload it, press the
(Double Feed Detection Skip) button on the scanner as shown below to
disable Detect Double Feed for the next scan, and then scan again. e
(Double Feed Detection Skip) button
only disables Detect Double Feed for one sheet.
Related Information
& “Required Settings for Special Originals in Epson Scan 2” on page 54
User's Guide
Specications of Originals and Placing Originals
36

Epson ds-570w Specifications

General

Optical Resolution	600 dpi
ADF Capacity	50 sheets
Duplex Scanning	Yes
Supported Operating Systems	Windows, Mac OS
Image Sensor	CIS (Contact Image Sensor)
Maximum Resolution	1200 dpi
Scan Speed (Color, A4, 300 dpi)	35 ppm / 70 ipm
Scan Speed (Black & White, A4, 300 dpi)	35 ppm / 70 ipm
Scanner Type	Sheetfed
Connectivity	Wi-Fi
Scan Speed	35 ppm
Scan to	Email, Cloud, USB
Scanning Method	Duplex
Interface	USB 3.0, Wi-Fi Direct
Daily Duty Cycle	4, 000 pages
Maximum Document Size	8.5 x 240 inches