Epson DS-70 User Manual

77
Light status Condition/solution
The ready light is orange Check the following:
• Make sure there are no originals jammed in the scanner.
• Make sure the scanner is connected to your computer securely.
• Make sure Epson Scan 2 is installed correctly.
• If a firmware update fails and the scanner enters recovery mode,
update the firmware again using a USB connection.
• Disconnect and re-connect the USB cable to the computer. If this
does not solve the problem, the scanner may be malfunctioning or
the light source in the scanner unit may need to be replaced. Contact
Epson for support.
DS-80W
1
Wi-Fi light
2
Wi-Fi AP light
3
battery light
4 Error status light
5 Ready light

Epson DS-70 Specifications

General

Scanner Type	Sheetfed
Optical Resolution	600 dpi
Color Depth	24-bit
Connectivity	USB 2.0
Maximum Resolution	1200 dpi
Supported Operating Systems	Windows, Mac
Max Scan Size	8.5" x 72"