Epson DS-730 - Page 112

❏ Image Format: Select the save format from the list.
You can make detailed settings for each save format except BITMAP and PNG.
Aer
selecting the save
format, select Options from the list.
❏ File Name: Check the save le name displayed.
You can change settings for le name by selecting Settings from the list.
❏ Folder: Select the save folder for the scanned image from the list.
You can select other folder or create a new folder by selecting Select from the list.
6.
Click Scan.
Note:
❏ You can also start scanning by pressing
x button on the scanner.
❏ To scan originals that are likely to jam, for example thin paper, enable Slow on the control panel to slow down the
scanning speed.
Press the
d button, and then select Scanner Settings > Slow.
e
scanned image is saved to the folder you
specied.
Required Settings for Special Originals in Epson Scan 2 Window
You need to set certain items on the Main Settings tab in Epson Scan 2 window when scanning special originals.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button
on the Scan Settings screen.
Type of Original Required Settings
Envelopes
Select O in Detect Double Feed.
Plastic cards
Select Plastic Card on the Document Size list, or select O in Detect Double Feed.
Carrier Sheet
❏ If you select Auto Detect from the Document Size list, paper skew in the original is
automatically corrected even if you select O in Correct Document Skew.
❏ If you select a other size than Auto Detect from the Document Size list, you can only use
Contents Skew when using Correct Document Skew.
Paper Skew is not applied when this is selected. When you select Paper and Contents Skew,
only contents skew is corrected.
Large size originals
If the size of the original you want to scan is not on the Document Size list, select Customize to
open the Document Size Settings window. Next, create the size manually on the window.
Long paper
If the size is not listed on the Document Size list, select Auto Detect (Long Paper) or select
Customize to create a custom document size.
Laminated cards
To scan transparent areas around the edges, select Customize on the Document Size list to open
the Document Size Settings window. Next, select Scan laminated card in the window.
Note:
e appropriate eect may not be achieved depending on the original. If transparent areas
around the edges are not scanned, select Customize from the Document Size list, and then
create the size manually.
Basic Scanning > Scanning from a Computer > Scanning Using Epson Scan 2
112