Epson DS-730 - Energy Saving; Transporting the Scanner

1.
Select Device Information on the home screen using the
l r button, and then press the OK button.
2.
Select Number of Scans
Aer
Replacing Roller using the
l r button, and then press the OK button.
3.
Press the OK button to reset the number of scans.
Related Information
& “Replacing the Roller Assembly Kit” on page 177
Energy Saving
You can save energy by using sleep mode or auto power o mode when no operations are performed by the
scanner. You can set the time period before the scanner enters sleep mode and turns o automatically. Any
increase will aect the product’s energy eciency. Consider the environment before making any changes.
1.
Select Settings on the home screen using the
l r button, and then press the OK button.
2.
Select Basic Settings using the
l r button, and then press the OK button.
3.
Select Sleep Timer or Power O Timer using the
l r button, and then press the OK button.
Note:
Available features may vary depending on the location of purchase.
4.
Check the settings, and change them if necessary.
5.
Press the OK button to set the timer.
Transporting the Scanner
When you need to transport the scanner to move or for repairs, follow the steps below to pack the scanner.
1.
Press the
P button to turn o the scanner.
2.
Unplug the AC adapter.
3.
Remove the cables and the devices.
Maintenance > Transporting the Scanner
182