Epson DS-730 - SSL;TLS Communication with the Scanner

Related Information
& “Running Web Cong on a Web Browser” on page 23
Conguring
a CA
Certicate
When you set the CA Certicate, you can validate the path to the CA certicate of the server that the scanner
accesses. is can prevent impersonation.
You can obtain the CA Certicate from the Certication Authority where the CA-signed Certicate is issued.
Importing a CA Certicate
Import the CA Certicate to the scanner.
1.
Access Web Cong and then select the Network Security tab > CA Certicate.
2.
Click Import.
3.
Specify the CA
Certicate
you want to import.
4.
Click OK.
When importing is complete, you are returned to the CA Certicate screen, and the imported CA Certicate is
displayed.
Related Information
& “Running Web Cong on a Web Browser” on page 23
Deleting a CA Certicate
You can delete the imported CA Certicate.
1.
Access Web Cong and then select the Network Security tab > CA Certicate.
2.
Click Delete next to the CA Certicate that you want to delete.
3.
Conrm that you want to delete the certicate in the message displayed.
4.
Click Reboot Network, and then check that the deleted CA Certicate is not listed on the updated screen.
Related Information
& “Running Web Cong on a Web Browser” on page 23
SSL/TLS Communication with the Scanner
When the server certicate is set using SSL/TLS (Secure Sockets Layer/Transport Layer Security) communication
to the scanner, you can encrypt the communication path between computers. Do this if you want to prevent
remote and unauthorized access.
Administrator Information > Advanced Security Settings > SSL/TLS Communication with the Scanner
229