Epson DS-730 - Various Scanning Settings for Document Capture Pro (for Windows Only)

6.
Aer
scanning stops, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
Note:
Press the
d button to make Scanner Settings.
· Slow: Slows down the scanning speed. Use this to scan originals that are likely to jam, for example thin paper.
· DFDS Function: Skips double feed detection once and continues scanning. Use this to scan originals that are detected
as double feeds, for example plastic cards or envelopes.
· Paper Protection: Reduces damage to the originals by stopping scanning immediately when a feeding error occurs.
· Detect Glass Dirt: Detects dirt on the glass surface inside the scanner.
7.
Aer you have scanned all originals, close Automatic Feeding Mode.
Press the
button on the scanner or press Finish on the Automatic Feeding Mode screen displayed on your
computer.
Note:
You can make timeout settings to exit Automatic Feeding Mode.
Select Settings on the Document Source list to open the Document Source Settings screen. Set Automatic Feeding
Mode Timeout (minutes) on the screen displayed.
e scanned image is saved to the folder you specied.
Related Information
& “Placing Originals” on page 33
Various Scanning Settings for Document Capture Pro
(for Windows Only)
Document Capture Pro allows you to easily scan and save documents such as ocial reports and forms, by using
the optimum settings to suit your needs. is section explains how to make settings for jobs that use convenient
functions such as sorting.
Advanced Scanning > Various Scanning Settings for Document Capture Pro (for Windows Only)
126