Epson DS-730 - Page 230

Conguring Basic SSL/TLS Settings
If the scanner supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt
communications. You can congure and manage the scanner using Web Cong while ensuring security.
Congure encryption strength and redirect feature.
1.
Access Web Cong and select the Network Security tab > SSL/TLS > Basic.
2.
Select a value for each item.
❏ Encryption Strength
Select the level of encryption strength.
❏ Redirect HTTP to HTTPS
Redirect to HTTPS when HTTP is accessed.
3.
Click Next.
A conrmation message is displayed.
4.
Click OK.
e scanner is updated.
Related Information
& “Running Web Cong on a Web Browser” on page 23
Conguring a Server Certicate for the Scanner
1.
Access Web Cong and select the Network Security tab > SSL/TLS > Certicate.
2.
Specify a certicate to use on Server Certicate.
❏ Self-signed
Certicate
A self-signed
certicate
has been generated by the scanner. If you do not obtain a CA-signed
certicate,
select this.
❏ CA-signed
Certicate
If you obtain and import a CA-signed
certicate
in advance, you can specify this.
3.
Click Next.
A
conrmation
message is displayed.
4.
Click OK.
e scanner is updated.
Related Information
& “Running Web Cong on a Web Browser” on page 23
& “Conguring a CA-signed Certicate” on page 225
& “Conguring a CA Certicate” on page 229
Administrator Information > Advanced Security Settings > SSL/TLS Communication with the Scanner
230