Epson DS-730 - Page 226

7.
Send the CSR to a
certicate
authority and obtain a CA-signed
Certicate
.
Follow the rules of each certicate authority on sending method and form.
8.
Save the issued CA-signed Certicate to a computer connected to the scanner.
Obtaining a CA-signed
Certicate
is complete when you save a
certicate
to a destination.
Related Information
& “Running Web Cong on a Web Browser” on page 23
CSR Setting Items
Items Settings and Explanation
Key Length Select a key length for a CSR.
Common Name You can enter between 1 and 128 characters. If this is an IP address, it should be a
static IP address. You can enter 1 to 5 IPv4 addresses, IPv6 addresses, host names,
FQDNs by separating them with commas.
The rst element is stored to the common name, and other elements are stored to
the alias eld of the certicate subject.
Example:
Scanner's IP address : 192.0.2.123, Scanner name : EPSONA1B2C3
Common Name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123
Organization/ Organizational Unit/
Locality/ State/Province
You can enter between 0 and 64 characters in ASCII (0x20-0x7E). You can divide
distinguished names with commas.
Country Enter a country code in two-digit number specied by ISO-3166.
Sender's Email Address You can enter the sender's email address for the mail server setting. Enter the
same email address as the Sender's Email Address for the Network tab > Email
Server > Basic.
Importing a CA-signed
Certicate
Import the obtained CA-signed Certicate to the scanner.
c
Important:
❏ Make sure that the scanner’s date and time is set correctly. Certicate may be invalid.
❏ If you obtain a certicate using a CSR created from Web Cong, you can import a certicate one time.
1.
Access Web Cong and then select the Network Security tab. Next, select SSL/TLS > Certicate, or IPsec/IP
Filtering > Client
Certicate
or IEEE802.1X > Client
Certicate
.
2.
Click Import
A certicate importing page is opened.
Administrator Information > Advanced Security Settings > Using a Digital Certicate
226