Epson DS-730 - Page 234

❏ Algorithm Settings
It is recommended that you select Any for all settings or select an item other than Any for each setting. If you
select Any for some of the settings and select an item other than Any for the other settings, the device may not
communicate depending on the other device that you want to authenticate.
Items Settings and Explanation
IKE Encryption Select the encryption algorithm for IKE.
The items vary depending on the version of IKE.
Authentication Select the authentication algorithm for IKE.
Key Exchange Select the key exchange algorithm for IKE.
The items vary depending on the version of IKE.
ESP Encryption Select the encryption algorithm for ESP.
This is available when ESP is selected for Security Protocol.
Authentication Select the authentication algorithm for ESP.
This is available when ESP is selected for Security Protocol.
AH Authentication Select the encryption algorithm for AH.
This is available when AH is selected for Security Protocol.
Conguring Group Policy
A group policy is one or more rules applied to a user or user group. e scanner controls IP packets that match
with congured policies. IP packets are authenticated in the order of a group policy 1 to 10 then a default policy.
1.
Access Web Cong and then select the Network Security tab > IPsec/IP Filtering > Basic.
2.
Click a numbered tab you want to
congure.
3.
Enter a value for each item.
4.
Click Next.
A conrmation message is displayed.
5.
Click OK.
e scanner is updated.
Group Policy Setting Items
Items Settings and Explanation
Enable this Group Policy You can enable or disable a group policy.
Access Control
Congure a control method for trac of IP packets.
Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering
234