Epson DS-730 User Manual

Setting of Remote
Address(Host)
IPv4* ✓ – ✓
IPv6** – ✓✓
Blank ✓✓✓
*1If IPsec is selected for Access Control, you cannot specify in a
prex
length.
*2If IPsec is selected for Access Control, you can select a link-local address (fe80::) but group policy will be disabled.
*3Except IPv6 link local addresses.
Related Information
& “Running Web Cong on a Web Browser” on page 23
References of Service Name on Group Policy
Note:
Unavailable services are displayed but cannot be selected.
Service Name Protocol type Local port
number
Remote port
number
Features controlled
Any – – – All services
ENPC UDP 3289 Any port Searching for a scanner from
applications such as Epson Device
Admin and the a scanner driver
SNMP UDP 161 Any port Acquiring and conguring of MIB from
applications such as Epson Device
Admin and the Epson scanner driver
WSD TCP Any port 5357 Controlling WSD
WS-Discovery UDP 3702 Any port Searching for a scanner from WSD
Network Scan TCP 1865 Any port Forwarding scan data from Document
Capture Pro
Network Push
Scan Discovery
UDP 2968 Any port Searching for a computer from scanner
Network Push
Scan
TCP Any port 2968 Acquiring job information of push
scanning from Document Capture Pro
HTTP (Local) TCP 80 Any port HTTP(S) server (forwarding data of
Web
Cong
and WSD)
HTTPS (Local) TCP 443 Any port
HTTP (Remote) TCP Any port 80 HTTP(S) client (rmware updating and
root
certicate
updating)
HTTPS (Remote) TCP Any port 443
Administrator Information > Advanced Security Settings > Encrypted Communication Using IPsec/IP Filtering
239

Epson DS-730 Specifications

General

Brand	Epson
Model	DS-730
Category	Scanner
Language	English