Epson DS-730 User Manual

Placing Standard Size Originals
1.
Extend the input tray extension. Slide out the output tray, extend the output tray extension, and then raise the
stopper.
Note:
❏ For A4 size or larger originals, make sure you pull out and extend the input tray extension.
❏ Make sure you pull out and extend the output tray extensions so that they are a little bit longer than the length of the
original, and raise the stopper so that the ejected originals can be stacked comfortably on the output tray.
❏ e stopper can move forward and backward on the output tray extension so that you can easily adjust the stopper
position to the best position for the originals being scanned.
❏ If thick originals bump into the output tray and fall from it, store the output tray and do not use it to stack the
ejected originals.
❏ If scanned images are still aected by ejected originals hitting the surface below the scanner, we recommend placing
the scanner on the edge of a table where the ejected originals can drop freely and you can catch them.
2.
Slide the edge guides on the input tray all the way out.
Specications of Originals and Placing Originals > Placing Originals > Standard Size Originals
35

Epson DS-730 Specifications

General

Brand	Epson
Model	DS-730
Category	Scanner
Language	English