Epson DS-730 - Page 43

c
Important:
Do not load plastic cards vertically.
4.
Slide the edge guides to
t
the edge of the plastic cards.
Note:
To scan plastic cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the
Scan Settings screen.
Select Plastic Card in Document Size or select O in Detect Double Feed on the Main Settings tab in Epson Scan 2.
See the Epson Scan 2 help for details.
If Detect Double Feed in the Epson Scan 2 window is enabled and a double feed error occurs, remove the card from the
ADF, reload it, press the
d button, and then select DFDS Function (Double Feed Detection Skip function) on the
control panel to set it to On. is disables Detect Double Feed for the next scan, and you can scan again. e DFDS
Function only disables Detect Double Feed for one sheet.
Specications of Originals and Placing Originals > Placing Originals > Plastic Cards
43