Epson DS-80W

1. Make sure that the computer is on. Wake the computer if it is in hibernate or sleep mode.
2. Connect the scanner to the computer using the micro USB cable.
Note:
❏ Use the USB cable that came with the scanner.
❏ To avoid causing any damage, do not add excessive force when connecting the USB cable to the USB port.
❏ Connect the scanner directly to the computer without using a USB hub.
❏ Time until full battery charge when the scanner is o.
USB 2.0 port: Approx. 3.5 hours
*
*
It takes much longer to charge the battery if the scanner is on.
❏ If the battery is fully charged and you do not want to consume the computer’s battery, disconnect the USB cable.
❏ Battery rated capacity: 1140 mAh (3.6 V)
❏
e
battery light
ashes
when the battery is charging. When charging is complete, the light indicates full
if the
scanner is on; if the scanner is o the light turns o.
User's Guide
Using the Scanner on the Battery
18