Epson DS-80W

Measurement Thickness
120×235 mm (4.72×9.25 in.) 0.38 mm (0.015 in.) or less
92×165 mm (3.62×6.50 in.)
Specications for Plastic Cards
ese are the specications for plastic cards that you can load into the scanner.
Size Card Type Thickness Loading Direction
ISO7810 ID-1 Type
54.0×85.6 mm
(2.1×3.3 in.)
With embossing 1.24 mm (0.05 in.) or less Horizontal (landscape)
Without embossing 1.0 mm (0.04 in.) or less
Note:
ISO7810 ID-1 size laminated cards (the thickness should be 0.6 mm (0.02 in.) or less) may not be scanned successfully.
Specications of Irregular Shaped Originals
By using the Carrier Sheet, you can scan originals that are wrinkled, curled, very thin, or irregularly shaped.
Size Thickness
Up to A4 0.3 mm (0.012 in.) or less
(excluding the thickness of the Carrier Sheet)
Note:
You cannot scan originals using the Carrier Sheet from Epson Smart Panel.
Types of Originals that Require Attention
e following types of originals may not be successfully scanned.
❏ Originals with an uneven surface such as letter head paper
❏ Originals with crinkles or fold lines
❏ Curled originals
❏ Coated paper
❏ Originals with punch holes
❏ Originals with folded corners
Note:
❏ To scan delicate originals or originals that are easily crinkled, use the Carrier Sheet.
❏ Try to atten the curled originals before scanning.
Types of Originals that Must Not be Scanned
e following types of originals must not be scanned.
User's Guide
Specications of Originals and Placing Originals
28