Using Multiple Projectors
148
f
Use the arrow buttons to move the point.
g
To continue to move another point, press [Esc] and then repeat steps 5
and 6.
h
To adjust another boundary line, press [Esc] until the screen shown in
step 3 is displayed.
i
When you are finished, press [Menu].
Adjusting RGBCMY
You can adjust the Hue, Saturation, and Brightness settings for R (red), G
(green), B (blue), C (cyan), M (magenta), and Y (yellow) color components.
Before you begin, turn on all the projectors so you can select color tone
settings that match on the unified screen.
a
Press the [Menu] button, select the Image menu, and press [Enter].
b
Select RGBCMY and press [Enter].
c
Select the color to adjust, and press [Enter].
To Next Page
Loading...
