Epson EB-1480Fi - Projector Network Settings -Network Menu; Network Menu - Network Settings Menu; Projector Network Settings - Network Menu

Projector Network Settings - Network Menu
220
Setting Options Description
Simple AP Projector Name
[Simple AP]
Displays wireless network status and
details.
Setting is only displayed when Simple
AP is set to On.
Items in [Simple AP]
• Antenna Level
• SSID
• Channel
• IP Address
• MAC Address
• Region Code
Wired LAN Info. Projector Name
DHCP
IP Address
Subnet Mask
Gateway Address
MAC Address
Displays wired network status and
details.
Wired LAN Info.
IPv6
[IPv6 Address
(Manual)]
[IPv6 Address
(Auto)]
Items in [IPv6 Address (Manual)]
• IPv6 Address
• Prefix Length
• Gateway Address
Items in [IPv6 Address (Auto)]
• Temporary Address
• Link-local Address
• Stateless Address
• Stateful Address
Network Settings — Configures your projector network
settings. See the network menu table for
details on the Network Settings.
Reset Network
Settings
— Resets all adjustment values on the
Network menu to their default settings.
a
Once you have connected your projector to your network, you can
select projector settings and control projection using a compatible Web
browser. This allows you to access the projector remotely.
gg Related Links
• "Network Menu - Network Settings Menu" p.220
Network Menu - Network Settings Menu
Settings on the Network Settings menu let you select the basic network
settings.
a
If you are connecting via wireless LAN, make sure the followings to
enable wireless LAN settings:
• Turn on the Wireless LAN Power setting in the projector's
Management menu.
Setting Options Description
Projector Name Up to 16
alphanumeric
characters
(do not use " * + ,
/ : ; < = > ? [ \ ] ` |
spaces)
Enter a name to identify the projector
over the network.
Remote Password Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector using the Basic Control. (User
name is EPSONREMOTE; default
password is guest.)
Web Control
Password
Up to 8
alphanumeric
characters
(do not use * :
spaces)
Enter a password for accessing the
projector over the Web. (User name is
EPSONWEB; default password is
admin.)