Projector Connections
40
a
• You can display drawing content and images from the current input
source (except the Home screen and images from a Screen Mirroring
source) on an external HDMI monitor.
• You can display the whole whiteboard screen during split screen
projection.
• There is a delay for whiteboard images displayed on an external
HDMI monitor.
a
Connect the HDMI cable to your monitor's HDMI input port.
b
Connect the other end to the projector's HDMI Out port.
Connecting to a VGA Monitor
If you connected the projector to a computer using a Computer port, you can
also connect an external monitor to the projector. This lets you see your
presentation on the external monitor even when the projected image is not
visible.
a
• If you want to output images to an external monitor when the
projector is turned off, set the A/V Output setting to Always On in
the projector's Signal I/O menu.
• To output images to an external monitor, set Monitor Out Port to
Monitor Out in the projector's Signal I/O menu.
• Content drawn on the screen using the interactive features is not
displayed on an external monitor. To display the drawn content on
an external monitor, use Easy Interactive Tools.
• Monitors that use a refresh rate of less than 60 Hz may not be able to
display images correctly.
a
Make sure your computer is connected to the projector's Computer
port.
a
• If there are two computer ports, make sure you use the
Computer1 port.
• Only analog RGB signals from the Computer1 port can be
output to an external monitor. You cannot output signals
input from other ports.
b
Connect the external monitor's cable to your projector's Monitor Out
port.
To Next Page
Loading...
