Projector Network Settings - Network Menu
221
Setting Options Description
Priority Control
Interface
Wired LAN
Wireless LAN
Sets the priority gateway.
Simple AP On
Off
Set to On to enable simple access point
mode for direct connection between your
projector and input devices. Make sure
you are also doing the following:
• Using Quick Connection Mode of
Epson iProjection
• Using Screen Mirroring connection
Setting is only displayed when Wireless
LAN Power is set to On.
SSID Automatically
assigned SSID
Displays the SSID of the projector for
selection on your device in simple AP
connections.
Security WPA2-PSK Displays the security type for simple AP
connections.
Passphrase Various
passphrases from 8
to 63 characters
Enter the passphrase of the projector for
entry on your device in simple AP
connections.
Channel Various channels
available
Set the frequency band (channel) using
in simple AP connections.
Wireless LAN — See the Wireless LAN menu table for
details.
Wired LAN — See the Wired LAN menu table for
details.
Mail Notification — See the Mail Notification menu table for
details.
Projector Control — See the Projector Control menu table for
details.
Network Projection — See the Network Projection menu table
for details.
gg Related Links
• "Network Menu - Wireless LAN Menu" p.221
• "Network Menu - Wired LAN Menu" p.223
• "Network Menu - Mail Notification Menu" p.224
• "Network Menu - Projector Control Menu" p.224
• "Network Menu - Network Projection Settings" p.225
Network Menu - Wireless LAN Menu
Settings on the Wireless LAN menu let you select the wireless LAN settings.
a
If you did not install an optional wireless LAN module, turn off the
Simple AP setting to enable you to select wireless LAN settings.
When connecting to a wireless network, it is strongly recommended that you
set security. When setting security, follow the instructions from the
administrator of the network system you want to connect to.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports AES encryption methods.
a
WPA2/WPA3-EAP and WPA3-EAP do not support WPA3 Suite-B
security.
Setting Options Description
Search Access Point To Search View Search for available wireless network
access points. Depending on the access
point settings, they may not be displayed
in the list.
SSID Up to 32
alphanumeric
characters
Enter the SSID (network name) of the
wireless LAN system the projector is
connecting to.
Security WPA2/WPA3-PSK Connects in WPA2/WPA3 personal
mode. Encryption method is selected
automatically according to the access
point settings. Set a passphrase which is
the same for the access point.
To Next Page
Loading...
