Epson EB-1480Fi - Multiple Projector Operation Settings - Multi-Projection Menu

Multiple Projector Operation Settings - Multi-Projection Menu
233
Settings on the Multi-Projection menu let you set up multiple projectors to
project a single unified image.
This menu appears for EB-1485Fi only.
Setting Options Description
Projector ID Off
1 through 9
Assigns an ID for the projector when you
use multiple projectors.
HDMI Out Setting Off
Pass Through
Process Out
Set to Pass Through to enable up to 4
projectors connected via HDMI cables to
project a unified image.
Set to Process Out to enable use of
interactive pens or finger touch
operations for up to 2 projectors.
Number of
Projectors
2 to 4 Sets the number of projectors used to
create a unified image area.
Setting is only displayed when HDMI
Out Setting is set to Pass Through.
Setting Options Description
Order 1 to 4 (When
HDMI Out Setting
is set to Pass
Through)
1 or 2 (When
HDMI Out Setting
is set to Process
Out)
Sets the position of this projector in
number order from left to right.
Connect Computer Yes
No
Set to Yes if you connected a computer
to the projector.
Setting is only displayed when HDMI
Out Setting is set to Process Out.
Geometry
Correction
— See the Installation menu table for
details on the Geometry Correction
settings.
Edge Blending Edge Blending
Top Edge
Bottom Edge
Left Edge
Right Edge
Line Guide
Pattern Guide
Guide Color
Corrects a border between multiple
images to create a seamless screen.
Black Level Color Adjustment
Area Correction
Reset
Adjusts the black color of the
overlapping image area
Scale — See the Image menu table for details on
the Scale settings.
Color Uniformity — See the Management menu table for
details on the Color Uniformity settings.
Light Source Mode — See the Operation menu table for details
on the Light Source Mode settings.