Using Multiple Projectors
150
b
Press the [Menu] button, select the Multi-Projection menu, and press
[Enter].
c
Select Scale and press [Enter].
You see this screen:
d
Choose one of the following options and press [Enter]:
• Auto to set the clip position automatically depending on the HDMI
Out Setting and Edge Blending settings.
• Manual to adjust clip ranges and position manually.
e
Select the Scale Mode setting and select one of these options:
• Zoom Display to maintain the image aspect ratio as you scale the
image.
• Full Display to adjust the image to the projector's screen size as you
scale the image.
f
If you select Manual, select one or more of the following scaling
options and adjust it as necessary:
• - or + to scale the image horizontally and vertically at the same time.
To Next Page
Loading...
