Projector Administration Settings - Management Menu
218
Event ID
code
Cause and solution
089D Key exchange failed. Check the wireless LAN security settings and
make sure that the security certificate is installed correctly.
0920 The internal battery that saves the projector's date and time settings
is running low. Contact Epson for help.
0B01 The internal storage could not be detected correctly. Turn off the
projector and disconnect the power cord, then reconnect the power
cord and turn the projector back on. When the projector is turned
on, the security certificate and address book are deleted. If that does
not solve the problem, contact Epson for help.
0BFF An error has occurred in the whiteboard function. Restart the
projector.
To Next Page
Loading...
