Projector Connections
44
Pen/Touch Settings
Setting Item
A B
Projector on the left
(connected to the
computer)
Projectors on the right
Installation of Projectors >
Sync of Projectors
Wired Wired
a
If you are using the projector in the same room as another projector
that does not support cable connection, set the Infrared Intensity
setting to Strong.
Signal I/O Settings
Setting Item
A B
Projector on the left
(connected to the
computer)
Projectors on the right
EDID 3240×1080/60Hz 3240×1080/60Hz
For Use without Interactive Features
See the following tables for more details on menu settings when you connect
multiple projectors to create a horizontally wide screen without the interactive
feature. When you do not use the interactive features, you can connect up to
four projectors in a chain.
Multi-Projection Settings
Setting Item
A B C
Projector on the left
(connected to the
computer)
Projectors in the
middle
Projector on the
right
HDMI Out Setting Pass Through Pass Through Pass Through
Number of
Projectors
Specifies the number of projectors connected in a chain.
Order Specifies the position of this projector in number order from
left to right
To Next Page
Loading...
