Epson EB-1485Fi - Selecting the Projector You Want to Operate

Using Multiple Projectors
139
a
Press the [Menu] button, select the Multi-Projection menu, and press
[Enter].
b
Select Projector ID and press [Enter].
c
Use the arrow buttons to select the identification number you want to
use for the projector. Then press [Enter].
d
Press [Menu] or [Esc] to exit the menus.
e
Repeat these steps for all the other projectors you want to operate from
one remote control.
Selecting the Projector You want to Operate
After setting the projector's ID, select the ID for the projector you want to
operate using the remote control.