Installing Batteries in the Pens
46
The Interactive pen uses one AA manganese battery, AA alkaline battery, or
Eneloop (BK-3MCC) rechargeable battery.
When the battery is low, the pen indicator flashes when you press the button
on the side of the pen. When the battery runs out, the pen indicator turns off.
Replace the battery as soon as it runs out.
Attention
Make sure you read the Safety Instructions before handling the battery.
a
Open the battery cover as shown.
b
Remove the old batteries, if necessary.
a
Dispose of used batteries according to local regulations.
c
Insert the battery with the + and – ends facing as shown.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
ensure the battery are inserted the correct way. If the battery is not used
correctly, it could explode or leak causing a fire, injury, or damage to the
product.
d
Replace the battery cover and press it down until it clicks into place.
To Next Page
Loading...
