Projector Administration Settings - Management Menu
216
Setting Options Description
Run Periodically Set to On to perform light source
calibration periodically every 100 hours
of usage.
Last Run Displays the date and time of the last
light source calibration.
Date & Time Date & Time
Daylight Saving
Time
Internet Time
Adjusts the projector's system time and
date settings. Select Daylight Saving
Time to set daylight saving time settings
for your region. Select Internet Time to
automatically acquire the time from an
Internet time server.
Schedule Settings — Schedules projector events to occur
automatically at selected dates and times.
Wireless LAN
Power
On
Off
Set to On to project images via a wireless
LAN. If you do not want to connect via
wireless LAN, turn it off to prevent
unauthorized access by others.
Wireless LAN
Diagnosis
Ping
IP Address
Ping until stopped
Start
Transmits Ping to confirm
communication status.
Log Save
Destination
Internal Memory
USB and Internal
Memory
Sets the location in which to save error
and operation log files.
Batch Setup Range All
Limited
Select All to copy all of the projector
menu settings using the batch setup
feature. Select Limited, if you do not
want to copy the following settings:
• Password Protection settings
• EDID in the Signal I/O menu
• Network menu settings
Language Various languages
available
Select the language for projector menu
and message displays.
Setting Options Description
Information Operation Hours
Light Source Hours
Estimated Remains
Source
Input Signal
Resolution
Refresh Rate
Sync Info
Video Signal
HDBaseT Signal
Level (EB-1485Fi)
Status
Serial Number
Event ID
[Version]
Displays information about the projector
and input sources. The displayed items
vary depending on the current input
source.
Items in [Version]
• Main
• HDBaseT (EB-1485Fi)
• Pixel Shift
• Document Camera
• HDBaseT Tx (EB-1485Fi)
Display Logs Temp Warning
Info
Power On/Off
History
Displays log data saved to the location
specified in the Log Save Destination
setting.
Reset Management
Settings
— Resets all adjustment values on the
Management menu to their default
settings, except for the following:
• Schedule Settings
• Language
a
When you set Menu Protection of Schedule to On, you cannot change
settings on the Schedule Settings. Set Menu Protection of Schedule to
Off first.
gg Related Links
• "Event ID Code List" p.217
• "Adjusting Color Uniformity" p.140
To Next Page
Loading...
Need help?
General
Weight and Dimensions
