Epson EB-1485Fi - Menu Settings for Multiple Projector Connections

Projector Connections
43
e
Select the necessary HDMI Out Setting and Sync of Projectors settings
in the projector's menus. See the list of settings for more details.
f
Select the necessary settings in the projector's Multi-Projection menu
to create a seamless unified image area (EB-1485Fi only).
g
If you will use interactive features, set the EDID setting to
3240×1080/60Hz in the projector's Signal I/O menu.
h
Select the necessary settings in the projector's Pen/Touch menu to
calibrate the interactive pen position and finger touch position.
See your projector's Installation Guide for instructions on calibrating
the interactive pen and finger touch positions.
i
Press [Menu] or [Esc] to exit the menus.
gg Related Links
• "Menu Settings for Multiple Projector Connections" p.43
• "Blending the Image Edges" p.142
• "Adjusting the Black Level" p.145
• "Scaling an Image" p.149
• "Adjusting Color Uniformity" p.140
• "Matching the Image Colors" p.144
• "Getting the Latest Version of the Documents" p.10
Menu Settings for Multiple Projector Connections
For Use with Interactive Features (EB-1485Fi only)
See the following tables for more details on menu settings when you connect
multiple projectors and use the interactive feature in a unified image area.
When you use the interactive features, you can connect two projectors in a
chain.
Multi-Projection Settings
Setting Item
A B
Projector on the left
(connected to the
computer)
Projector on the right
HDMI Out Setting Process Out Process Out
Order Specifies the position of this projector in number order
from left to right
Connect Computer Yes No
Edge Blending > Any
Edges > Blend Start
Position
0 0
Edge Blending > Any
Edges > Blend Range
300 300