Projector Parts and Functions
24
Projector Parts - Control Pad
The Control Pad comes with the EB-1485Fi only.
Name Function
A
Front cover To connect cables, open the cover by pulling forward
on the tab at the top of the front cover.
B
Indicator lights Indicates the control pad's status.
Power: Lit blue means the power is supplied to the
control pad.
Link: Lit blue means the control pad is communicating
with projector.
Name Function
C
Power button [ ]
Turns the projector on or off.
D
HDMI1/HDMI2
button
Switches the input source to HDBaseT and projects
from the device connected to the HDMI1 or HDMI2
port on the control pad.
E
USB-A port Use to connect a USB storage device.
F
USB-B port Use to connect a USB cable to the computer to use the
interactive pen as a mouse.
G
HDMI1/HDMI2 port Inputs video signals from HDMI compatible video
equipment and computers.
This port is compatible with HDCP2.3.
H
Cable path Route cables through here.
I
Cable path (upper) Route cables through here.
J
Screw holes (for
installation)
The screw holes for securing the control pad.
K
HDBaseT port Open a port cover to connect a LAN cable to the
projector.
L
USB-B port Use to connect a computer to the projector using a
USB cable when you connect a USB device to the
control pad.
M
Power inlet Use to connect the power cord to the control pad.
gg Related Links
• "Projector Parts - Control Pad" p.24
• "Connecting a Computer to the Control Pad" p.33
• "Connecting a Video Source to the Control Pad" p.36
• "Connecting a USB Flash Drive to the Control Pad" p.38
To Next Page
Loading...
