Epson EB-1485Fi - Adjusting the Image Position; Resizingthe Imagewith the Buttons; Selecting an Image Source

Selecting an Image Source
72
When multiple image sources are connected to the projector, such as a
computer and DVD player, you can switch from one image source to the
other.
a
Make sure the connected image source you want to use is turned on.
b
For video image sources, insert a DVD or other video media and press
play.
c
Do one of the following:
• Press the [Source Search] button on the control panel or remote
control until you see the image from the source you want.
a
This screen is displayed when no image signal is detected.
Check the cable connections between the projector and image
source.
Any devices connected to the control pad's HDMI ports are
displayed as the HDBaseT image source (EB-1485Fi only).