Projector Network Settings - Network Menu
222
Setting Options Description
WPA2/WPA3-EAP Connects in WPA2/WPA3 enterprise
mode. Encryption method is selected
automatically according to the access
point settings.
WPA3-PSK Communication is performed using
WPA3 security. Uses AES method for
encryption. When establishing a
connection from a computer to the
projector, enter the value set in the
passphrase.
WPA3-EAP Connects in WPA3 enterprise mode.
Encryption method is selected
automatically according to the access
point settings.
Open Security is not set.
Passphrase Various
passphrases from 8
to 63 characters
Enter the pre-shared passphrase used on
the network.
When the passphrase is entered and the
[Enter] button is pressed, the value is set
and displayed as an asterisk (*).
We recommend changing the passphrase
periodically for security. If the network
settings are initialized, it returns to the
initial passphrase.
Setting is only displayed when Security is
set to WPA3-PSK or WPA2/WPA3-
PSK.
EAP Type
(For WPA3-EAP
and WPA2/WPA3-
EAP security)
PEAP Authentication protocol widely used in
Windows Server.
PEAP-TLS Authentication protocol used in
Windows Server. Select this when using a
client certificate.
EAP-TLS Authentication protocol widely used to
use a client certificate.
Setting Options Description
EAP-FAST Select this when these authentication
protocols are used.
User name Up to 64
alphanumeric
characters
Enter a user name for the network. To
include a domain name, add it before a
backslash and the user name
(domain\username).
When importing a client certificate, the
name the certificate was issued to is
automatically set.
Password Up to 64
alphanumeric
characters
Enter a password for authentication.
After you enter the password and select
Set, the password is displayed as an
asterisk (*).
Setting is only displayed when EAP Type
is set to PEAP or EAP-FAST.
Client Certificate — Imports the client certificate.
Setting is only displayed when EAP Type
is set to PEAP-TLS or EAP-TLS.
Verify Server
Certificate
On
Off
Set to On to verify the server certificate
when a CA certificate has been set.
CA certificate — Imports the CA certificate.
RADIUS Server
Name
Up to 64
alphanumeric
characters
Enter the server name to verify.
To Next Page
Loading...
