Image Shape
67
c
Select the Installation menu and press [Enter].
d
Select Geometry Correction and press [Enter].
e
Select Point Correction and press [Enter].
f
Select the point number and press [Enter].
You see the grid on the projected image.
a
If you want to change the grid color for visibility, select a
different Pattern Color setting.
g
Use the arrow buttons to move to the point you want to correct, then
press [Enter].
h
Use the arrow buttons to correct distortion as necessary.
i
To correct any remaining points, press [Esc] to return to the previous
screen, then repeat steps 8 and 9.
j
When you are finished, press [Esc].
To Next Page
Loading...
