PC Free Operating Methods
Although the following steps are explained based on the remote control,
you can perform the same operations from the control panel.
Starting PC Free
a
Change the source to USB.
s "Switching to the Target Image Using the Remote Control"
p.44
b
Connect the USB storage device to the projector.
s "Connecting USB Devices" p.30
PC Free starts and the file list screen is displayed.
The following files are displayed as thumbnails (file contents are
displayed as small images).
- JPEG files
- AVI files (displays the image at the start of the movie)
Other files or folders are displayed as icons as shown in the
following table.
Icon File Icon File
JPEG files
*
BMP files
GIF files PNG files
AVI (Motion JPEG)
files
*
* When it cannot be displayed as a thumbnail, it is displayed as an icon.
a
You can also insert a memory card into a USB card reader and then
connect the reader to the projector. However, some commercially
available USB card readers may not be compatible with the
projector.
The projector can recognize up to five media at a time.
If the following screen (Select Drive screen) is displayed, use the
[
], [ ], [ ], and [ ] buttons to select the drive you want to
use, and then press the [Enter] button.
To display the Select Drive screen, position the cursor on Select
Drive at the top of the file list screen, and then press the [Enter]
button.
Projecting Images
a
Use the [ ], [ ], [ ], and [ ] buttons to select the file or
folder you want to project.
Projection Functions
86
To Next Page
Loading...
Need help?
General
Weight and Dimensions
