105
Inserting and Ejecting SD Cards (EB-G5350/G5150 only)
You can project image/movie files saved on SD memory cards and
SDHC (SD High Capacity) cards with PC Free in EasyMP by
connecting those devices to the projector. s EasyMP Operation
Guide "PC Free Basic Operations"
From here on these are referred to as SD cards.
The following explains how to insert and eject SD cards.
Inserting
Insert the SD card into the card slot with its top surface
facing up.
Firmly insert the card as far as it can go.
Reading the SD Card Access Lamp
The SD card access lamp is lit or flashing as follows to indicate the access
status of the SD card.
Attention
Insert the SD card so that it faces the correct direction. Inserting a
card in the wrong direction may result in malfunction or damage.
Procedure
SD card (commercially available)
: Flashing : Lit: : Off
Lamp Status
Reading or writing data to the SD card.
The SD card is standing by.
The SD card is not performing any operations.
To Next Page
Loading...
Need help?
General
