Restrictions in the Target Projector when Using Multiple Projectors
30
Setting the Projector ID
A
During projection, press the [Menu] button on the
projector and select "Extended" - "Projector ID"
from the configuration menu. s "Using the
Configuration Menu" p.40
B
Choose the ID you want to set and press the [Enter]
button.
C
Press the [Menu] button to close the configuration
menu.
Checking the Projector ID
Use the following procedure to check the projector ID.
During projection, while holding the [ID] button, press the [Help] button
to display the current projector ID on the screen.
Procedure
Using the remote control Using the control panel
Procedure
Remote control
Keep
pressed
To Next Page
Loading...
Need help?
General
