Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5350/G5150 only)
96
f Making a Connection Using the Push Button Method
A
Select "Push Button Method".
The Push Button Method screen is displayed.
B
Press the [Enter] button on the projector's control
panel when prompted by the screen.
Then, the Push Button Method screen is displayed.
C
Press the button on the access point when
prompted by the screen.
This completes the setup.
D
Press the [Enter] button or the [Esc] button.
It returns to the Wireless LAN menu screen.
Procedure
To Next Page
Loading...
Need help?
General
