When connecting using the Push Button Method, follow the steps
given below.
Go to "Making a connection using the PIN Code Method" when
connecting using the "PIN Code Method".
s
p.127
Making a connection using the push button method
Procedure
A
Select "Push Button Method".
The Push Button Method screen is displayed.
B
Press the [Enter] button on the projector's control panel when
prompted by the screen.
Then, the Push Button Method screen is displayed.
C
Press the button on the access point when prompted by the
screen.
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only)
126
To Next Page
Loading...
