Control Panel
Name Function
A
[t] button
Turns the projector power On or Off. s Quick Start
Guide
B
[Source Search]
button
Changes to the next input source that is connected to the
projector and is sending an image. s p.27
C
[Enter] button
If pressed during projection of computer analog RGB
signals, it automatically adjusts the Tracking, Sync., and
Position to project the optimum image.
When the configuration menu or a Help screen is
displayed, it accepts and enters the current selection and
moves to the next level. s p.54
Name Function
D
[w/ ][v/ ]
button
Corrects vertical keystone distortion. s p.25
If pressed while the configuration menu or a Help screen is
displayed, these buttons only have the [
] and [ ]
functions which select menu items and setting values.
s p.54
When projecting using PC Free or Connect to a Network
Projector, these buttons function only as [
] and [ ]
buttons. (EB-G5950/G5650W)
E
[Help] button
Displays and closes the Help screen which shows you how
to deal with problems if they occur. s p.85
F
[Esc] button
Stops the current function.
If pressed when the configuration menu is displayed, it
moves to the previous menu level. s p.54
G
[</ ][>/ ] button
Corrects horizontal keystone distortion. s p.25
If pressed while the configuration menu or a Help screen is
displayed, these buttons only have the [
] and [ ]
functions which select menu items and setting values.
s p.54
When projecting using PC Free or Connect to a Network
Projector, these buttons function only as [
] and [ ]
buttons. (EB-G5950/G5650W)
H
[Menu] button
Displays and closes the configuration menu.
s
p.53
Part Names and Functions
15
To Next Page
Loading...
