Epson EB-G5950 - Projecting Two Images Simultaneously (Split Screen); Split Screen Setup and Sources

A split screen can be used to divide the screen into a left screen (U) and a
right screen (
V) and simultaneously project two images.
Input Sources for Split Screen Projection
The combinations of input sources that can be projected on a split screen
are listed below. The image from the HDMI input port must be displayed
on either the left or right screen.
Images from computers connected through the network or images from the
USB(TypeA) port cannot be projected. (EB-G5950/G5650W)
Left or right screen Other screen
HDMI Computer1
Computer2
BNC
S-Video
Video1
Video2
Operating Procedures
Projecting on a split screen
Procedure
A Press the [Split] button on the remote control while the
projector is projecting.
The currently selected input source will be displayed on the left
screen.
Remote Control
q
The split screen can also be started from Split Screen on the
Configuration menu. s p.59
B Press the [Menu] button on the remote control or the control
panel.
The Split Screen Setup will be displayed.
Projecting Two Images Simultaneously (Split Screen) (EB-G5950/G5900/G5650W/G5600 only)
34