This completes the setup.
D
Press the [Enter] button or the [Esc] button.
It returns to the Wireless LAN menu screen.
E
Select "Setup complete" - "Yes."
This completes the setup of the connection between the projector and
the access point. Press the [Menu] button to close the configuration
menu.
Making a connection using the PIN Code Method
q
Before you can make a connection using the "PIN Code Method", a
connection must have already been setup between the computer and
the access point.
Procedure
A
Select "PIN Code Method".
Making a WPS (Wi-Fi Protected Setup) Connection with a Wireless LAN Access Point (EB-G5950/G5650W only)
127
To Next Page
Loading...
