Sub Menu Function
Display
You can make settings related to the projector's display.
Messages: The following messages are not displayed on the screen when this item is set to Off.
Overheating and other warnings, messages such as when there is no video input, and when Freeze is On or when changing Source, Color
Mode or Aspect.
Display Background
*1
: You can set the screen status for when no image signal is available to Black, Blue, or Logo.
Startup Screen
*1
: Set this parameter to On to display the user's logo when projection is started.
A/V Mute
*1
: You can set the screen displayed during A/V Mute as Black, Blue, or Logo.
User's Logo
*1
You can change the User's Logo that is displayed as a background during Display Background or Startup Screen. s p.47
Projection
Set this parameter according to the installation status of the projector. s p.131
Extended Menu
61
To Next Page
Loading...
