Removing and Attaching the Projector Lens Unit
Removing
Attention
•
Only remove the lens unit when necessary. If dust or dirt enter the projector,
projection quality deteriorates and it could cause a malfunction.
•
Try not to touch the lens section with your hand or fingers.
If fingerprints or oils are left on the surface of the lens, projection quality
deteriorates.
•
If the lens shift has been done, set the lens shift to the center before replacing
the lens unit.
s
p.22
Procedure
A
If the lens unit removal button is held in place with a screw,
remove the screw.
B
Hold down the lens unit removal button and turn the lens
anti-clockwise until you hear it click.
C
Pull the lens unit straight out as it is released.
Installing Optional and Supplied Accessories
141
To Next Page
Loading...
