C
Use the [h] button on the remote control or the [w/ ], [v /
], [
<
/ ] and [
>
/ ] buttons on the control panel to select the
corner you want to adjust, and then press the [Enter] button.
D
Correct the position of the corner using the [h] button on the
remote control, or the [
w/ ], [v/ ], [</ ] and [>/ ]
buttons on the control panel.
If the triangle in the direction you are adjusting the shape turns gray,
as shown in the screenshot below, you cannot adjust the shape any
further in that direction.
E
Repeat procedures 3 and 4 as needed to adjust any remaining
corners.
Adjusting the Projected Image
24
To Next Page
Loading...
