Epson EcoTank Pro M15180 Series - Page 354

c
Important:
If you obtain a
certicate
using a CSR created from Web
Cong
, you cannot import a deleted
certicate
again. In
this case, create a CSR and obtain a certicate again.
1.
Access Web
Cong,
and then select the Network Security tab. Next, select SSL/TLS >
Certicate
or IPsec/IP
Filtering > Client
Certicate
or IEEE802.1X > Client
Certicate
.
2.
Click Delete.
3.
Conrm
that you want to delete the
certicate
in the message displayed.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 246
Updating a Self-signed Certicate
Because the Self-signed Certicate is issued by the printer, you can update it when it has expired or when the
content described changes.
1.
Access Web
Cong
and select the Network Security tab > SSL/TLS >
Certicate
.
2.
Click Update.
3.
Enter Common Name.
You can enter up to 5 IPv4 addresses, IPv6 addresses, host names, FQDNs between 1 to 128 characters and
separating them with commas. e rst parameter is stored to the common name, and the others are stored to
the alias eld for the subject of the certicate.
Example:
Printer's IP address : 192.0.2.123, Printer name : EPSONA1B2C3
Common name : EPSONA1B2C3,EPSONA1B2C3.local,192.0.2.123
4.
Specify a validity period for the certicate.
5.
Click Next.
A conrmation message is displayed.
6.
Click OK.
e
printer is updated.
Note:
You can check the certicate information from Network Security tab > SSL/TLS > Certicate > Self-signed Certicate
and click Conrm.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 246
Administrator Information > Advanced Security Settings > Using a Digital Certicate
354