Epson EH-LS500W - Operating Using a Smartphone (Remote Control Function)

Using the Projector on a Network
55
Operating using a smartphone (remote control function)
By using Epson iProjection, you can operate the projector from a smartphone or tablet.
Tap
in Epson iProjection to display the menu.
Tap Remote Control on the menu to display the following screen.
c
When Remote Password is set, you need to enter the password. Once the password has been
recognized, you do not need to enter it from the second time.
Button Function
a
Displays the menu.
b
Turns the projector on or off.
c
Changes to the image from each input port. s p.23
d
Sets the image quality using the on-screen instructions.
e
Saves, loads, erases, or rename a memory. s p.41
f
Turns HDMI Link on or off. s p.46
g
When HDMI Link is On, you can perform operations such as Play,
Stop, Fast Forward, Rewind, Next Chapter, Previous Chapter, and
Pause.
h
Allows you to specify Color Mode, Frame Interpolation, Image
Enhancement, Image Processing, Dynamic Contrast, Light Out-
put, White Balance, Gamma, and RGBCMY.
i
Allows you to specify 3D Display, 3D Format, 3D Depth, Diagonal
Screen Size, and 3D Brightness.
j
Allows you to specify Aspect, Keystone, Reset All, Reset Memo-
ry, Test Pattern, Zoom, Image Shift.
k
When HDMI Link is set to On, you can adjust the volume.