Maintenance
91
About PJLink
PJLink was established by the JBMIA (Japan Business Machine and Information System Industries Association)
as a standard protocol for controlling network-compatible projectors as part of their efforts to standardize
projector control protocols.
This projector complies with the PJLink Class2 standard established by the JBMIA.
The port number used by the search function of PJLink is 4352 (UDP).
You need to make network settings before you can use PJLink. See the following for more information on
network settings.
s
p.65
It supports all commands defined by PJLink Class2 except for the following commands. The compliance is
confirmed by the PJLink standard adaptability verification.
URL: https://pjlink.jbmia.or.jp/english/
•
Non-compatible commands
Function PJLink Command
Mute settings Image muting set AVMT 11
Audio muting set AVMT 21
•
Correspondence table for port name and source number
Port name Source number
HDMI1 32
HDMI2 33
HDMI3 36
LAN 52
•
Manufacturer name displayed for "Manufacture name information query"
EPSON
•
Model name displayed for "Product name information query"
EPSON LS500B/LS500W
To Next Page
Loading...
