EasyManua.ls Logo

Epson EH-LS500W - Specifications; Eh-Ls500 W;Eh-Ls500 B

Epson EH-LS500W
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
98
Specifications
EH-LS500W/EH-LS500B
* The following specifications are current as of June 2019. Details of accessories are subject to change without
notice.
Product name
EH-LS500W/EH-LS500B
Appearance
458 (W) x 209.5 (H) x 375 (D) mm
(not including adjustable foot)
Panel Size
0.61"
Display method
Polysilicon TFT active matrix
Resolution
1920 (W) x 1080 (H) x 3
Focus adjustment
Manual
Zoom adjustment
1 - 1.35 (Digital)
Light source
Laser diode
Light source output
Max. 104.5 W
Wavelength of light source
449 - 461 nm
Light source life expectancy
*1
Approx. 20,000 hours
Power supply
100 - 240 V AC ±10%, 50/60 Hz, 3.8 - 1.7 A
Power con-
sumption
100 to 120 V area
When operating (when Light Output is 100%): 381 W
When operating (when Light Output is 50%): 236W
220 to 240 V area
When operating (when Light Output is 100%): 366W
When operating (when Light Output is 50%): 230W
Power consumption when
standing by
Communication On: 2.0 W
Communication Off: 0.5 W
Operating altitude
Altitude 0 to 3048 m
Operating temperature
*2
+5 to +35°C (No condensation) (at an altitude of 0 to 2286 m)
+5 to +30°C (No condensation) (at an altitude of 2287 to 3048 m)
Storage temperature
-10 to +60°C (No condensation)
Mass
Approx. 9.3 kg
Speaker
10 W x 2
*1
Estimated time until the brightness of the light source is reduced by half.
(Assuming the projector is being used in an environment containing airborne particles of 0.04 to 0.2 mg/m
3
.
This is an approximate guide only and may change depending on the projector's usage and surroundings.)
*2
When using the projector at an altitude of 1,500 m or more, set High Altitude Mode to On to make sure that
the projector's internal temperature is adjusted correctly.
s p.63

Table of Contents

Related product manuals