Epson EH-LS500W - Image and Signal Settings

Configuration Menu
57
Configuration Menu Functions
Configuration Menu Operations
On the Configuration menu, you can make adjustments and settings for Signal, Image, Input Signal, and so on.
a
Press the [Menu] button.
Remote control Control panel
The Configuration menu is displayed.
b
Use the up and down buttons to select
the top menu on the left, and then
press the [Enter] button to confirm the
selection.
When you select the top menu on the left,
the sub menu on the right changes.
The line at the bottom is a guide for
operations.
c
Use the up and down buttons to select
the sub menu on the right, and then
press the [Enter] button to confirm the
selection.
The adjustment screen for the selected
function is displayed.
d
Use the up/down/left/right buttons to
adjust the settings.
Ex.) Adjustment bar
Ex.) Choices
Press the [Enter] button on an item
displaying this
icon to change to the
selection screen for that item.
Press the [Esc] button to return to the
previous level.
e
Press the [Menu] button to exit the
menu.