c
Turn on and wear the 3D Glasses.
Perform pairing when using the 3D Glasses for the first time.
s
"Registering the 3D Glasses to the projector (pairing)" p.49
If you cannot view the 3D images, press the [2D/3D] button on the
remote control. 3D Display On is displayed on the projected screen.
a
• How a 3D image is perceived varies depending on the
individual.
• If you cannot view the 3D effect correctly, perform Inverse
3D Glasses from the Configuration menu.
s Signal - 3D Setup - Inverse 3D Glasses p.78
• How the 3D image is viewed may change depending on the
temperature around the projector and how long the lamp has
been used. Refrain from using the projector if the image is
not projected normally.
• After viewing, slide the [Power] switch on the 3D Glasses to
Off.
• If the 3D Glasses do not receive a 3D signal for at least 30
seconds, they turn off automatically. To turn the 3D Glasses
back on, slide the [Power] switch to Off, and then slide it
back to On.
a
• The following functions are unavailable while viewing 3D
images.
- Capturing a User's Logo
- Pointer
- E-Zoom
• If you perform the following functions while viewing a 3D
image, the image becomes 2D.
- Auto H/V-Keystone (Auto V-Keystone)
- Screen Fit
- Focus help (EB-W16 only)
- Displaying the Test Pattern
- A/V Mute
- Freeze
Viewing area for 3D images
The following indicates the viewing area for 3D images. View within an
area of 10 meters from the projector.
Projection Functions
50
To Next Page
Loading...
Need help?
General
Weight and Dimensions
