Basic Operations
30
c
The Home screen disappears after 10 minutes of inactivity.
Turning Off
a
Turn off the connected equipment.
b
Press the button on the remote
control or the control panel.
Remote control Control panel
A confirmation message is displayed.
c
Press the button again.
The operation indicator flashes and the
projector begins to cool down.
c
When Standby Confirmation is
set to Off, you can turn off the
projector by pressing the button
on the remote control once.
s
Extended - Display - Standby
Confirmation p.92
d
Wait until cool-down is complete.
When cool-down is complete, the
operation indicator stops flashing.
e
Disconnect the power cord.
c
•
If the power cord is connected,
some electricity is consumed
even if no operations are made.
•
When connecting the power cord
again, wait a sufficient time
interval.
f
Attach the lens cap.
Downloaded from www.vandenborre.be
To Next Page
Loading...
