Basic Operations
36
Remote control Control panel
c
•
You can also adjust the volume from the Configuration menu. s Settings - Audio - Volume p.89
•
When an AV System is connected to the projector and you want to adjust the volume for the AV system,
set HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.89
•
You cannot adjust the volume of Bluetooth audio devices from the projector.
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can power on and then gradually increase the volume.
Hiding the Image and Muting the Audio Temporarily (A/V Mute)
Press the button to show or hide the image. The audio is also muted or played.
c
•
For movies, the image and audio continue to play even during A/V Mute. You cannot resume from the
point that you muted the video and audio using the
button.
•
To mute or play only the audio, press the button.
•
When outputting audio from an AV system and you want to adjust the volume for the AV system, set
HDMI Link to On and Audio Out Device to AV System.
s Settings - HDMI Link p.89
Downloaded from www.vandenborre.be